Showing 601 items matching steam engines
-
Stawell Historical Society Inc
Photograph, 2 "R" Class Steam Engines passing by Stawell Station
... 2 "R" Class Steam Engines passing by Stawell Station....Two "R" Class Steam Train Engines with passenger carriages...Black and White photo of "R" Class Steam Engines passing... grampians Photograph 2 "R" Class Steam Engines passing by Stawell ...Two "R" Class Steam Train Engines with passenger carriages passing Stawell Railway Station.Black and White photo of "R" Class Steam Engines passing Stawell Railway Station. The two Steam engines Locos with Passenger carriages. c 1940. stawell, railway, transport -
Federation University Historical Collection
Book - Exercise book, Astronomy, Steam Engines, etc, 1889
... Astronomy, Steam Engines, etc...Steam Engines... Exercise book Book Astronomy, Steam Engines, etc exercise book ...exercise book with marbled cover. Hand written lecture notes inside. astronomy, steam engines, calculations, italian -
Federation University Historical Collection
Book, A.C. Wannan et al, Wannan's engine-drivers' guide to the management, care, and working of steam boilers, engines, and pumps; and guide to examinations for certificates of competency, 1890
... working of steam boilers, engines, and pumps; and guide to...steam engines..., and working of steam boilers, engines, and pumps; and guide ...In 1898 Arthur Fussell did Mechanics in Mining at School of Mines Ballarat.A small red cloth bound book of 189 pages containing diagrams and illustratins. The cover title was printed in gold. On the inside cover and on the title page is written in pencil Arthur Fussell, 73 Errard St S, Ballaratwannans, engine driver's guide, steam boilers, steam engines, pumps, arthur fussell, steam -
Federation University Historical Collection
Booklet, Ballarat School of Mines Register of Attendances for Steam and Gas Engines, 1909
... Ballarat School of Mines Register of Attendances for Steam...steam and gas engines.... gilchrist steam gas steam engines gas engines steam and gas engines ...The Ballarat School of Mines is a predecessor institution of Federation University Australia. A slim, green pastel, hard cover volume with dark blue spine. Two full-width pages for entering names of those enrolled.ballarat school of mines, a.d. gilchrist, steam, gas, steam engines, gas engines, steam and gas engines -
Hume City Civic Collection
Photograph, 1980s
... steam engines...A coloured photograph of a steam engine painted blue, black... melbourne Photograph A coloured photograph of a steam engine painted ...This is possibly a photograph which records trips made around Victoria of the 'Flying Scotsman' engine which was brought to Australia in late 1980s.A coloured photograph of a steam engine painted blue, black and red travelling under full steam along a rail track.steam engines, the flying scotsman, railways, george evans collection -
Federation University Historical Collection
Booklet, Ballarat School of Mines Register of Attendances for Steam and Gas Engines, 1908
... Ballarat School of Mines Register of Attendances for Steam.... Gilchrist Steam Gas engines ...The Ballarat School of Mines is a predecessor institution of Federation University Australia. A slim, green pastel, hard cover volume with dark blue spine. Two full-width pages for entering names of those enrolled.ballarat school of mines, a.d. gilchrist, steam, gas engines -
Stawell Historical Society Inc
Photograph, Steam Rail Engine & Workers standing on steam engine. c1900
... Steam Rail Engine & Workers standing on steam engine. c1900...Steam Rail Engine & 9 workers standing on a Steam Engine... standing on a Steam engine c1900.... grampians Photograph Steam Rail Engine & Workers standing on steam ...Steam Rail Engine & 9 workers standing on a Steam Engine. Martin Hayes (Snr.) driver leaning out of cabin. John McInerney left of M. Hayes and below Frank Dunn. The steam engine is under a rail bridge and in the background is a timber building. c1900.Old sepia photo on a damaged mount of 9 railway workers standing on a Steam engine c1900.Martin Hayes (Snr.)stawell railways transport -
Linton and District Historical Society Inc
Postcard - Photograph, Steam Train, Linton Railway Station
... steam engines...Postcard which has a black and white image of a steam... of a steam engine and carriages at Linton Railway Station. The R ...Postcard which has a black and white image of a steam engine and carriages at Linton Railway Station. The R class engine was constructed at the Phoenix Foundry, Ballarat, between 1881 and 1886.Text, reverse: "Boy sitting on engine is Harold Morgan, man wearing bowler hat standing beside engine thought to be Mr Bourke, engine driver, father of Kitty and Lizzie. White house behind station master's cap, weatherboard cottage occupied by Mrs Howe, her daughter Myra and son Billy. Man on station wearing cap thought to be station master, Alec Thompson's father".linton railway station, steam engines, transport, railways -
Tatura Irrigation & Wartime Camps Museum
Photograph, Tatura Railway station
... Siding, with steam engines.... Siding, with steam engines.... of the Rosella Siding, with steam engines. ...Three photos of Tatura Railway station & one of the Rosella Siding, with steam engines.Three photos of Tatura Railway station & one of the Rosella Siding, with steam engines. -
Malmsbury Historical Society
Photograph (Item), "M.H.S. Exhibition At St Johns Church, Steam Engines", Malmsbury c1991
... "M.H.S. Exhibition At St Johns Church, Steam Engines... Church, Steam Engines", Malmsbury c1991 Associated with - M.H.S ...Associated with - M.H.S. Buildings - St Johns Church People - "Keath, George" -
Bay Steamers Maritime Museum
Book, Newnes Marine Engineering Volume 1 Marine Steam Engines and Turbines Marine Steam Boilers
... Newnes Marine Engineering Volume 1 Marine Steam Engines and... Engines and Turbines Marine Steam Boilers Black leather look hard ...Black leather look hard cover book of 588 pagesHand wirtten in blue pen "The property of / Law Praid / S. Townhead Rd / Cotehill" Hand written in pencil ET $15 / 2 vols" -
Linton and District Historical Society Inc
Photograph, Steam Train, Linton Railway Station
... steam engines... and hats standing on platform beside steam engine R327 at Linton... in suits and hats standing on platform beside steam engine R327 ...Postcard black and white photograph of men in suits and hats standing on platform beside steam engine R327 at Linton Railway station and two young men sitting on the side front platform of train.Text, reverse: Boy sitting on engine is Harold Morgan, man wearing bowler hat standing beside engine thought to be Mr. Bourke, engine driver, father of Kitty and Lizzie. White house behind station master's cap, weatherboard cottage occupied by Mrs. Howe, her daughter Myra and son Billy. Man on station wearing cap thought to be station master, Alec Thompson's father.steam engines, railways, linton railway station -
Orbost & District Historical Society
black and white photograph, Barkla, Ian R, 1925
... This is a photograph of Steam Engine K104. K104...on back - "Orbost 1924 Steam Engine K104"... of a steam locomotive. on back - "Orbost 1924 Steam Engine K104 ...This is a photograph of Steam Engine K104. K104 was numbered as such in 1923. Engines were renumbered from K100-K109 to K140-149 in 1940. This one was renumbered as K144. The Bairnsdale-Orbost railway was opened in 1916 to serve the agricultural and timber industry. Because of the decline in traffic and heavy operating costs, the line was finally closed in August, 1987.This is a pictorial record of rail transport in the 1920s. This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost. On April 10 1916, the first scheduled train service left Orbost for Bairnsdale. The Bairnsdale-Orbost railway was opened to serve the agricultural and timber industry. Because of the decline in traffic and heavy operating costs, the line was finally closed in August, 1987.A black / white photograph of a steam locomotive. on back - "Orbost 1924 Steam Engine K104"orbost-railway steam-locomotive-k104 transport-rail -
Bay Steamers Maritime Museum
Book, J. Duncan, Steam and Other Engines, 1932
... Steam and Other Engines... melbourne Book Steam and Other Engines Green cloth hard cover book ...Green cloth hard cover book of 537 pagesFirst page, handwritten in pencil "9/6 / William Jack T?leve / 45 Grand Avenue / Rose Park" Back cover homework instructions in same handwritting in pencilnon-fiction, engineering, steam, science, heat engines, engines, mechanics -
Bay Steamers Maritime Museum
Book, J. Duncan, Steam and Other Engines, 1947
... Steam and Other Engines... melbourne Book Steam and Other Engines Green cloth hard cover book ...Green cloth hard cover book of 537 pagesInside front cover handwritten in pencil "19/7/48 / Leonard J Stafford" Stamped in purple ink "TECHNICAL BOOK &MAGAZINE CO. / 297-239 SWANSTON ST. / OPP. MELBOURNE HOSPITAL / CENT. 2041 - MELBOURNE. C.S."non-fiction, engineering, steam, science, heat engines, engines, mechanics -
Federation University Historical Collection
Photograph, Ballarat School of Mines Davey Paxman Experimental Steam Engine, c1902
... Ballarat School of Mines Davey Paxman Experimental Steam...davey paxman experimental steam engine...The Davey Paxman Experimental Steam Engine was purchased...Black and white photograph of an experimental steam engine... Engine Black and white photograph of an experimental steam engine ...The Davey Paxman Experimental Steam Engine was purchased as the result of a bequest from Thomas Bath. The 'substantial sum' was used to build an Engineering Laboratory. The Ballarat School of Mines Council minutes of 08 November 1901 record: - Plans for [the] proposed building were submitted ... and ... it was resolved that a temporary building for an Engineering Laboratory be put up.' This laboratory, as an existing building, is first mentioned in the Ballarat School of Mines President's Annual Report of 1901, presented on 28 February 1902, reporting 'the erection of a building 67ft long by 33 ft wide' This report also lists all the equipment that would be accommodated in the Engineering Laboratory, including the experimental steam engine and boiler. The experimental Davey-Paxman steam engine arrived in Ballarat towards the end of 1902. The Engineering Laboratory was opened on 14 August 1903 by His Excellency Sir Sydenham Clarke. This engineering laboratory remained in use till about 1945. By 1944 preparations were under way at the Ballarat School of Mines to expand existing facilities, to be ready for the influx of returned soldiers. A new Heat Engines laboratory was built, this time of brick construction, replacing the previous corrugated-iron shed. In the early stages the steam engine was used to drive an overhead transmission shaft for machinery in the adjacent workshop. Later the steam engine was moved to a space that became the Heat Thermodynamics Laboratory. At the end of 1969 the engine was relocated to the Thermodynamics Laboratory at the then Ballarat Institute of Advanced Education (BIAE) Mt Helen Campus. It was donated to Sovereign Hill in 2006. According to the research of Rohan Lamb in 2001 around five experimental steam engines were made by Davey Paxman, and three of these had similar configuration to the Ballarat School of Mines Steam Engine, however, each of these was also unique with different valve arrangements. The list, which was on a scrap of paper in a folio held in the Essex Archives, confirmed that one was sent to India. The Ballarat steam engine can be dated to late 1901 to early 1902. Zig Plavina was responsible for moving the steam engine to Mount Helen, and worked on it as a technician for many years. He observed the following: * The condenser is driven by the low pressure engine. * The following arrangements are possible: i) the high pressure engine alone, exhausting to atmosphere. Condenser not used, crankshaft flanges not coupled. ii) crankshafts coupled, mains pressure (120 psi) steam supplied to high pressure engine, partially expanded steam delivered to low pressure engine (Tandem operation). Choice available re exhaust steam: either to the condenser or to atmosphere. iii) crankshafts not coupled, reduced pressure steam supplied to low pressure engine. Exhaust steam - either to the condenser or to atmosphere. * Valve arrangement - a choice of Pickering cut-off or throttle governor. On low pressure engine - throttle governor only. Black and white photograph of an experimental steam engine which was produced for the Ballarat School of Mines. It was designed for experimental purposes, such as testing of efficiency, etc. The laboratory which housed the steam engine was lit with gas lighting. davey paxman experimental steam engine, model steam engine, davey paxman, steam, thomas bath, thermodynamics -
Sunbury & District Heritage Association Inc
Photograph, c 1970s
... steam engines...The K class steam engines were often used on Victoria's... passengers and goods across the state. steam engines ...The K class steam engines were often used on Victoria's regional rail lines taking passengers and goods across the state. A coloured photograph of a stationary steam train on railway tracks with the driver looking out his cabin window and a man walking alongside the train. steam engines -
Federation University Historical Collection
Photograph - Photograph - Black and white, Ballarat School of Mines Model Steam Engine
... Ballarat School of Mines Model Steam Engine...steam engine...The Davey Paxman Experimental Steam Engine was purchased... Steam Engine installed at the Ballarat School of MInes. ... Model Steam Engine Black and white photograph of the Davey ...The Davey Paxman Experimental Steam Engine was purchased as the result of a bequest from Thomas Bath. The 'substantial sum' was used to build an Engineering Laboratory. The Ballarat School of Mines Council minutes of 08 November 1901 record: - Plans for [the] proposed building were submitted ... and ... it was resolved that a temporary building for an Engineering Laboratory be put up.' This laboratory, as an existing building, is first mentioned in the Ballarat School of Mines President's Annual Report of 1901, presented on 28 February 1902, reporting 'the erection of a building 67ft long by 33 ft wide' This report also lists all the equipment that would be accommodated in the Engineering Laboratory, including the experimental steam engine and boiler. The experimental Davey-Paxman steam engine arrived in Ballarat towards the end of 1902. The Engineering Laboratory was opened on 14 August 1903 by His Excellency Sir Sydenham Clarke. This engineering laboratory remained in use till about 1945. By 1944 preparations were under way at the Ballarat School of Mines to expand existing facilities, to be ready for the influx of returned soldiers. A new Heat Engines laboratory was built, this time of brick construction, replacing the previous corrugated-iron shed. In the early stages the steam engine was used to drive an overhead transmission shaft for machinery in the adjacent workshop. Later the steam engine was moved to a space that became the Heat Thermodynamics Laboratory. At the end of 1969 the engine was relocated to the Thermodynamics Laboratory at the then Ballarat Institute of Advanced Education (BIAE) Mt Helen Campus. It was donated to Sovereign Hill in 2006. According to the research of Rohan Lamb in 2001 around five experimental steam engines were made by Davey Paxman, and three of these had similar configuration to the Ballarat School of Mines Steam Engine, however, each of these was also unique with different valve arrangements. The list, which was on a scrap of paper in a folio held in the Essex Archives, confirmed that one was sent to India. The Ballarat steam engine can be dated to late 1901 to early 1902. Zig Plavina was responsible for moving the steam engine to Mount Helen, and worked on it as a technician for many years. He observed the following: * The condenser is driven by the low pressure engine. * The following arrangements are possible: i) the high pressure engine alone, exhausting to atmosphere. Condenser not used, crankshaft flanges not coupled. ii) crankshafts coupled, mains pressure (120 psi) steam supplied to high pressure engine, partially expanded steam delivered to low pressure engine (Tandem operation). Choice available re exhaust steam: either to the condenser or to atmosphere. iii) crankshafts not coupled, reduced pressure steam supplied to low pressure engine. Exhaust steam - either to the condenser or to atmosphere. * Valve arrangement - a choice of Pickering cut-off or throttle governor. On low pressure engine - throttle governor only.Black and white photograph of the Davey Paxman Experimental Steam Engine installed at the Ballarat School of MInes. steam engine, model steam engine, davey paxman, thomas bath, experimental steam engine -
Federation University Historical Collection
Engineering, Steam Engine Indicator, Late 19th Century
... Steam Engine Indicator...richards improved patent steam engine indicator...For an explanation about the history of steam engine...Brass steam-engine indicator 125mm tall - accompanied... Engineering Steam Engine Indicator Brass steam-engine indicator 125mm ...For an explanation about the history of steam engine indicators, visit: http://www.archivingindustry.com/Indicator/contentback.htm [last viewed 20 May 2013]. For information about the Richards' Improved Patent Steam-Engine Indicator see John Walter's publication 'The Engine Indicator: a short history of the autographic patterns from 1800 to the present day' - available online via: http://www.archivingindustry.com/Indicator/chaptertwo.pdf Information on Casartelli, Manchester is also available online via: http://www.archivingindustry.com/Indicator/chapterfour.pdf Refer pp.21-22 [last viewed 20 May 2013]Brass steam-engine indicator 125mm tall - accompanied by four steel piston springs - and a wooden measuring ruleIndicator [a] Casartelli Manchester [b] 41 ; Ruler [a] 12 to the Inch [b] No.2 [c] Casartelli & Son Manchesterrichards improved patent steam engine indicator, casartelli manchester -
Federation University Historical Collection
Book, Winding Engines and Winding Appliances, 1912
... steam engines... from Great Depths; Colliery Winding; Electric Winding; Steam... Depths; Colliery Winding; Electric Winding; Steam engine details ...George McCulloch was an inspector of machinery for the Western Australia Department of Mines. Brown hard covered book of 452 pages including illustrations and index. Contents include Design; Tail ropes; Winding from Great Depths; Colliery Winding; Electric Winding; Steam engine details, Drims; brakes; Clutches; Safety Devices; Winding ropes; Cages; Skips; Cage Safety Gear, Safety Cages; Cage Guides; Head gearsmining, winding, engines, steam engines, safety devices, winding ropes, cages, safety cages -
Puffing Billy Railway
Steam Engine - Tangye Single Cylinder Horizontal
... Steam Engine - Tangye Single Cylinder Horizontal...Builders Number 4767 Used for steam engine driving...Steam Engine - Cast Iron (painted) Steel (raw) Bronze (Raw...-and-the-dandenong-ranges Steam Engine - Tangye Single Cylinder Horizontal ...Builders Number 4767 Used for steam engine driving instruction at the Royal Melbourne Institute of Technology build date of approximately 1884 +/- 1 year. worked out from http://www.internationalsteam.co.uk/mills/burmamill22.htm Donated by The Royal Melbourne Institute of technology in 1969 Of Interest : The Vertical and Horizontal Tangye engines on display are of the design that won a Gold Medallion at the Paris Industrial Exhibition of 1878.Historic - Industrial Steam Engine EquipmentSteam Engine - Cast Iron (painted) Steel (raw) Bronze (Raw) Timber (Oiled)Tangye Birminghampuffing billy, steam, rmit, tangye, horizontal engine -
Puffing Billy Railway
Steam Engine - Tangye single cylinder vertical, Circa 1920
... Steam Engine - Tangye single cylinder vertical ...vertical steam engine... crushing plant. While large horizontal steam engines predominated...single cylinder vertical Steam Engine made of Cast Iron...-and-the-dandenong-ranges Steam Engine - Tangye single cylinder vertical ...Used by the Malvern city council until 1969 to drive a rock crushing plant. While large horizontal steam engines predominated in major factories, small vertical steam engines like this were the workhorses of industries that had modest power requirements. This reliable little engine, made by leading UK manufacturer Tangye Bros of Birmingham Steam engines had the advantage that any fuel could be used to fire their boilers, but they were less convenient and efficient than internal combustion engines, required operators with higher skill levels, and had lower power to weight ratios. Tangye Limited was founded in 1857 in Birmingham by businessman Richard Tangye (1833-1906) and his mechanic brothers James and Joseph; brothers Edward and George joined them later. Richard was born near Redruth in Cornwall and educated at the Friends School at Sidcot, Somerset, where he became a pupil-teacher. From there he moved to Birmingham to work as a clerk for an engineering firm. In 1856 he started a hardware factor and commission agent business in Birmingham whose customers were mainly Cornish mine-owners in the Redruth district. From 1858 Tangyes concentrated on the manufacture of machinery and secured the sole right to manufacture Weston's differential pulley block (object 2003/45/1). They established their Cornwall Works in the Birmingham suburb of Smethwick in 1864 and soon developed a huge range of products. It was stated that 'there are perhaps no other works in the kingdom so largely employed upon so great a variety of specialities as the Cornwall Works of Messrs Tangye Bros.' The Tangyes attracted creative people to work for them. They wrote: 'We are in a position to offer unusual facilities to Inventors for carrying out their patents.' Info about Tangye Bros of Birmingham from Powerhouse Museum https://ma.as/207954 Donated by Malvern City Council in 1969 Of Interest : The Vertical and Horizontal Tangye engines on display are of the design that won a Gold Medallion at the Paris Industrial Exhibition of 1878.Historic - Industrial Steam Engine Equipmentsingle cylinder vertical Steam Engine made of Cast Iron, (Painted)Tangye Birmingham Builder's number 2462tangye, vertical steam engine, steam engine, puffing billy, stone crushing, george and george, malvern -
Flagstaff Hill Maritime Museum and Village
Book - Reference, John Perry, The Steam Engine and Gas and Oil Engines, 1899
... The Steam Engine and Gas and Oil Engines...the steam engine and gas and oil engines...The Steam Engine and Gas and Oil Engines: a book... Warrnambool great-ocean-road Reference Book The Steam Engine and Gas ...This is the first edition of the book, printed in 1899. It has since been reprinted with slight corrections in January 1900 and with correction in 1902. It is a text book and reference book based on the study of steam, gas and oil driven machinery of the late 19th and early 20th century. The author, John Perry D. Sc., F.R.S., was born in 1850 and passed away in 1920. He was a Professor of Mechanics and Mathematics in the Royal College of Science, Vice-President of the Institution of Electrical Engineers, and Vice-President of the Physical Society. This book has significance as the First Edition of the book, published in 1899. The book is significant to the history, understanding and evolution of power driven machines. The principles apply to the machinery of the late 19th to early 20th centuries. The Steam Engine and Gas and Oil Engines: a book for the use of students who have time to make experiments and calculations Author: John Perry D.Sc., F.R.S. Publisher: Macmillan & Co Ltd, London Printed by Richard Clay and Sons, Limited, London and Bungay This is the First Edition of the book, printed in 1899 A hard cover book, red linen with black print. The Preface is written by the aughor on 22nd February 1899. The book contains many diagrams and tables as well as having reference numbers on many paragraphs in the chapters.Pencil on front endsheets "SJ 9""Rec. 371 a" Stamped in purple , front endsheet "F. ST. G. D. HOLYMAN" "L.4." Handwritten in ink "Richard G ---- / Liverpool --- P---ye"warrnambool, shipwrecked-coast, flagstaff-hill, maritime-museum, shipwreck-coast, book, the steam engine and gas and oil engines, john perry, reference book, scientific book, steam engines, gas engines, oil engines, combustion engines -
Stawell Historical Society Inc
Photograph, Steam Engine -- Stationary with men & boys standing beside engine
... Steam Engine -- Stationary with men & boys standing beside...Steam Engine with 12 men and 3 young children standing...Black & white copy of photo of Steam engine with 12 men... grampians Photograph Steam Engine -- Stationary with men & boys ...Steam Engine with 12 men and 3 young children standing along side the train engine. based on the surrounds, its presumed the photo was taken at Heatherlie Quarry. No names are known of people.Black & white copy of photo of Steam engine with 12 men and 3 young boys standing alongside the engine presumed the photo was taken at Heatherlie quarry. railways -
Glen Eira Historical Society
Plan - Pritchard Steam Power Company
... Steam Engines... the steam engine for use within the contemporary era. To that end... tabletop model of a steam engine that Arnold built for him – which ...This file contains one item: 1/A draft of a plan for a museum exhibit from the Spirit of Enquiry Workbook, by Denis Shephard, and dated 07/08/2007, pertaining to alternative energy research within the suburbs of Melbourne between 1950 and 1980. Much of the content is irrelevant to Glen Eira. However; one of the two principle subjects of the exhibit, discussed between pages 20 and 28, is the work of Ted Pritchard, who was based out of Caulfield. Ted and his father, Arnold Pritchard, aspired to reinvent the steam engine for use within the contemporary era. To that end, they fitted a Chevrolet pickup truck with one of their prototypes – with the result being one of the main items constituting the exhibit. Ted’s interest in steam power had been spurred by a working tabletop model of a steam engine that Arnold built for him – which constitutes another of the exhibit’s items. Also included is a brief history of the development of Caulfield. The plan is embellished with numerous images, with relevant ones including maps of Caulfield and black-and-white photographs of the Pritchards’ truck, model and workshop.engines, engineering, engineers, inventions, inventors, steam engines, steam power vehicles, pritchard ted, pritchard arnold, pritchard steam power company, caulfield, shephard denis, pritchard mrs., trucks, pritchard edward, holland grove, balaclava road, workshops, grants, pritchard automotive steam designs, caulfield racecourse, caulfield technical school, caulfield trades school, caulfield technical college, chisholm institute, camden town, southdown knitting company, home street, fl hutchison, fowler street, vale knitting mills, nepean road, winterfold spinning mills, acme knitting mills, glen eira road, mj ryan knitwear, leather industry, lane joseph, hotham street, casey william, glen huntly road, pickering william, paris leather manufactory, woorayl street, tv tatchell, premier wire works, webb street, chesterfield ha, manufacturing industry, victory milk plant, bl coram & sons -
Federation University Historical Collection
Book, Mechanics' Magazine vol. 3, 1825 (exact)
... steam engine... Worcestor's steam engine, extinction of fires, Cameron's Soda Water...-moving carriage (car), Lord Worcestor's steam engine, extinction ...Hardcovered book, half leather bound with marbled paper. Formerly book number 4040 from the Ballaarat East Public Library. Contents include: new pit-saw, self-moving carriage (car), Lord Worcestor's steam engine, extinction of fires, Cameron's Soda Water Apparatus, Newton's Lectures on Astronomy, coining at the Royal Mint, mechanical geometry, lifting ships by steam, voltaic-mechanic agent, steam navigation, portable hand-mill, Brown's pneumatic engine, Bell's invention for saving lives from shipwreck, triple pump, cycloidal chuck, potato-washer, sand clock, Galvanic electricity, perpetual motion, Hadley's Quadrent, Wollaston's Night-Bolt, rope bridges, boring machinery, locomotive steam-engines, new London Bridge, naval architecture, steam and water wheel, Spencer's Patent Forge, boat with wings, ivory profile portraits, Jenning's Gas burner, Ramage's Telescope, washing machine, tallow lamp, iron masts, self regulating pendulum, prismatic compass, simple blowpipe. Includes image of Henry Brougham, and many drawings of inventions.non-fictioncar, newton, fire, shipwreck, bell, naval architecture, locomotive, ballaarat east public library, ballarat east public library, ballarat east library, henry brougham, potassium, meridian lines, pit saw, self moving carriage, lord worcestor, steam engine, cameron s, soda water, astronomy, royal mint, mechanical geometry, lifting ships by steam, voltaic mechanic agent, steam navigation, hand mill, brown s pneumatic engine, triple pump, cycloidal chuck, potato washer, sand clock, galvanic electricity, perpetual motion, hadley s quadrent, wollaston s night bolt, rope bridges, boring machinery, steam engines, new london bridge, steam and water wheel, spencer s patent forge, boat with wings, ivory profile portraits, jenning s gas burner, ramage s telescope, washing machine, tallow lamp, iron masts, self regulating pendulum, prismatic compass, simple blowpipe, bookplate -
Maldon Vintage Machinery Museum Inc
Steam Engine
... Steam Engine...Vertical cylinder steam engine painted black, red and grey... goldfields Steam Engine Vertical cylinder steam engine painted black ...Vertical cylinder steam engine painted black, red and grey. In working order. Large flywheel and pulley on RHS and mounted on a raised concrete base. Belt drive overhead governor.No. "8532" is cast on the LHS of the frame.engines, steam, vertical -
Stawell Historical Society Inc
Photograph, Steam Engine in a cutting
... Steam Engine in a cutting...Steam Train Engine in Hills cutting c 1940. Photo from...Two identical photos of a steam engine & goods trucks... grampians Photograph Steam Engine in a cutting Two identical photos ...Steam Train Engine in Hills cutting c 1940. Photo from "Boothey" EstateTwo identical photos of a steam engine & goods trucks heading towards Melbourne. The larger photo a copy of the smaller photo c 1940A543 printed on the back of one of the photos.railways -
Federation University Historical Collection
Photograph - Colour photograph, Davey Paxman Experimental Steam Engine in the Mount Helen Workshop, c1994
... Davey Paxman Experimental Steam Engine in the Mount Helen...davey paxman experimental steam engine...The Davey Paxman Experimental Steam Engine was purchased...The Davey Paxman Experimental Steam Engine was purchased... photograph Photograph Davey Paxman Experimental Steam Engine ...The Davey Paxman Experimental Steam Engine was purchased by the Ballarat School of Mines as the result of a bequest from Thomas Bath.The Davey Paxman Experimental Steam Engine was purchased as the result of a bequest from Thomas Bath. The 'substantial sum' was used to build an Engineering Laboratory. The Ballarat School of Mines Council minutes of 08 November 1901 record: - Plans for [the] proposed building were submitted ... and ... it was resolved that a temporary building for an Engineering Laboratory be put up.' This laboratory, as an existing building, is first mentioned in the Ballarat School of Mines President's Annual Report of 1901, presented on 28 February 1902, reporting 'the erection of a building 67ft long by 33 ft wide' This report also lists all the equipment that would be accommodated in the Engineering Laboratory, including the experimental steam engine and boiler. The experimental Davey-Paxman steam engine arrived in Ballarat towards the end of 1902. The Engineering Laboratory was opened on 14 August 1903 by His Excellency Sir Sydenham Clarke. This engineering laboratory remained in use till about 1945. By 1944 preparations were under way at the Ballarat School of Mines to expand existing facilities, to be ready for the influx of returned soldiers. A new Heat Engines laboratory was built, this time of brick construction, replacing the previous corrugated-iron shed. In the early stages the steam engine was used to drive an overhead transmission shaft for machinery in the adjacent workshop. Later the steam engine was moved to a space that became the Heat Thermodynamics Laboratory. At the end of 1969 the engine was relocated to the Thermodynamics Laboratory at the then Ballarat Institute of Advanced Education (BIAE) Mt Helen Campus. It was donated to Sovereign Hill in 2006. According to the research of Rohan Lamb in 2001 around five experimental steam engines were made by Davey Paxman, and three of these had similar configuration to the Ballarat School of Mines Steam Engine, however, each of these was also unique with different valve arrangements. The list, which was on a scrap of paper in a folio held in the Essex Archives, confirmed that one was sent to India. The Ballarat steam engine can be dated to late 1901 to early 1902. Zig Plavina was responsible for moving the steam engine to Mount Helen, and worked on it as a technician for many years. He observed the following: * The condenser is driven by the low pressure engine. * The following arrangements are possible: i) the high pressure engine alone, exhausting to atmosphere. Condenser not used, crankshaft flanges not coupled. ii) crankshafts coupled, mains pressure (120 psi) steam supplied to high pressure engine, partially expanded steam delivered to low pressure engine (Tandem operation). Choice available re exhaust steam: either to the condenser or to atmosphere. iii) crankshafts not coupled, reduced pressure steam supplied to low pressure engine. Exhaust steam - either to the condenser or to atmosphere. * Valve arrangement - a choice of Pickering cut-off or throttle governor. On low pressure engine - throttle governor only.davey paxman experimental steam engine, model steam engine, steam, thermodynamics laboratory, thomas bath, bequest -
Federation University Historical Collection
Photograph - Black and white photograph, Ballarat School of Mines Model Steam Engine
... Ballarat School of Mines Model Steam Engine...steam engine...The Davey Paxman Experimental Steam Engine was purchased... Steam Engine. On the brake is returned serviceman Norman... Experimental Steam Engine. On the brake is returned serviceman Norman ...The Davey Paxman Experimental Steam Engine was purchased as the result of a bequest from Thomas Bath. The 'substantial sum' was used to build an Engineering Laboratory. The Ballarat School of Mines Council minutes of 08 November 1901 record: - Plans for [the] proposed building were submitted ... and ... it was resolved that a temporary building for an Engineering Laboratory be put up.' This laboratory, as an existing building, is first mentioned in the Ballarat School of Mines President's Annual Report of 1901, presented on 28 February 1902, reporting 'the erection of a building 67ft long by 33 ft wide' This report also lists all the equipment that would be accommodated in the Engineering Laboratory, including the experimental steam engine and boiler. The experimental Davey-Paxman steam engine arrived in Ballarat towards the end of 1902. The Engineering Laboratory was opened on 14 August 1903 by His Excellency Sir Sydenham Clarke. This engineering laboratory remained in use till about 1945. By 1944 preparations were under way at the Ballarat School of Mines to expand existing facilities, to be ready for the influx of returned soldiers. A new Heat Engines laboratory was built, this time of brick construction, replacing the previous corrugated-iron shed. In the early stages the steam engine was used to drive an overhead transmission shaft for machinery in the adjacent workshop. Later the steam engine was moved to a space that became the Heat Thermodynamics Laboratory. At the end of 1969 the engine was relocated to the Thermodynamics Laboratory at the then Ballarat Institute of Advanced Education (BIAE) Mt Helen Campus. It was donated to Sovereign Hill in 2006. According to the research of Rohan Lamb in 2001 around five experimental steam engines were made by Davey Paxman, and three of these had similar configuration to the Ballarat School of Mines Steam Engine, however, each of these was also unique with different valve arrangements. The list, which was on a scrap of paper in a folio held in the Essex Archives, confirmed that one was sent to India. The Ballarat steam engine can be dated to late 1901 to early 1902. Zig Plavina was responsible for moving the steam engine to Mount Helen, and worked on it as a technician for many years. He observed the following: * The condenser is driven by the low pressure engine. * The following arrangements are possible: i) the high pressure engine alone, exhausting to atmosphere. Condenser not used, crankshaft flanges not coupled. ii) crankshafts coupled, mains pressure (120 psi) steam supplied to high pressure engine, partially expanded steam delivered to low pressure engine (Tandem operation). Choice available re exhaust steam: either to the condenser or to atmosphere. iii) crankshafts not coupled, reduced pressure steam supplied to low pressure engine. Exhaust steam - either to the condenser or to atmosphere. * Valve arrangement - a choice of Pickering cut-off or throttle governor. On low pressure engine - throttle governor only.Black and white photograph of the Davey Paxman Experimental Steam Engine. On the brake is returned serviceman Norman WIlliam Ludbrook (Diploma Electrical Engineering, 1952). Far right is Roy E. Mawby (Diploma Electrical Engineering, 1950)steam engine, model steam engine, davey paxman, electrical engineering, laboratory, scientific instrument, norman ludbrook, norman william ludbrook, roay mawby, roy e. mawby